MPTIC P500s has a variety of payment functions,It based on Android
5.1.1 operation system,equipped with Qualcomm quad-core 1.1GHz CPU,
adopts first-class manufacturers accessories, owns advanced
data acquisition unit,such as MOTO 1D/2D barcode scanning engine.
It has built-in thermal printer, could read magnetic strip card, IC card, non-contact card.
With multifunctional dock,it could read QRcode/barcode on mobile easily,also could communicate with barcode scanners、PC ect.
It also has 4G wireless data and communication function,
is a high quality industrial smart POS terminal.
Download the Product Specifications of P500s
Powerful and first-class configurations
Quad-Core: adopts Qualcomm 1.1GHz quad core processor.
Memory:8GB eMMC/1GB DDR3,support external micro SD card, 32 GB at most
World model & variety wireless connections
WiFi: double band & industrial WiFi module, dual-band & industrial WiFi module, can prevent data replace effectively.
Blue-tooth: V4.0+ EDR, lower power consumption, better performance.
Network:Covering most operators network standard,4G LTE,3G & 2G
2 kinds of navigation: support GPS and Beidou navigation methods;
Barcode scanning: excellent barcode scanning engine.
Intelligent split-type pedestal
Equip with high speed Thermal printer
Printing speed not less than 18 lines/S, 58mm*50mm, 4 USB Type-A, support USB 2.0 HOST
Rich Serial Peripheral Interface
RJ11 port, circumscribed cashbox equipment
RS232 port, circumscribed scanner equipment
Charging port, 1 DC-JACK,3.5mm
Pedestal have 8 POG PIN touch point, 1 of them was charging
Optional blue tooth 4.0
Optional wired internet communication ,pedestal provide a LAN port , transmission speed not less than 100Mbit
1 power indicator light(LED1,Red), pedestal connect power, indicator light on
1 communication indicator light(LED3,White), device put in pedestal, data communication (via touch point or blue tooth)
Weight: 418g(battery included)
Operating Temp: -20°C~60°
Storage Temp: -40°C~80°
Humidity: 90% RH non-condensing
Drop Test: 0.8m drop protection
Roller Drop Test: 500 times
ESD protection: ±8KV contact discharge；±15KV air discharge
CPU: Qualcomm quad-core 1.1GHz
OS: Android 5.1
RAM/ROM: ROM 8GB EMMC; RAM 1G DDR3;support external micro SD card, 32 GB at most
Display: 5 inch. Capacitive, multi touch; 1280*720, ultra wide Angle IPS display
Keypad: 1 physical keys (Power key);Virtual keys of Android system
Battery: Lithium polymer battery, 3.8V, 3000mAh
Printer: Built in 2 inch thermal printer, roll width 58mm, roll outer diameter 40mm(with Intelligent split-type pedestal)
BarCodes Scanning: Motorola 2D scanner, support 1D/2D(other brand optional)
Card reader:Magnetic strip card, IC card, non-contact card
Camera: 2M rear camera (supporting flash), 0.3M front camera.
NFC:Support ISO14443/ISO15693 standard 13.56MHz RFID tag recognition
Navigation: Built-in GPS, support AGPS; BDS second generation optional
Indicator Light: System indicator, POS non-contact indicator
Audios: Built-in speaker, receiver, microphone, vibrator
Sensors: Gravity sensor
Network Type: FDD-LTE/TD-LTE/WCDMA/TD-SCDMA//GSM/CDMA2000/CDMA 1X
Network Spectrum: FDD-LTE Band1/3; TD-LTE Band38/39/40/41; WCDMA/HSPA 2100/850MHz; TD-SCDMA/HSPA Band34/39; GSM/GPRS/EDGE 850/900/1800MHz; CDMA2000/CDMA 1X 800MHz
WLAN: 2.4GHz/5GHz dual band WiFi; 802.11 a/b/g/n Built-in Antenna
WPAN: BT2.1+EDR/3.0/4.1LE built-in antenna
USB Interface: Micro USB2.0
Charger Jack: DC jack or Intelligent split-type pedestal
Power Supply Jack: Pogo Pin charging pedestal port
* the above configuration parameters are only for reference, and the specific configuration may be different because of the different type of product.
Lithium polymer battery,Intelligent split-type pedestal, Power adapter, Hand rope